The NG-2 'GOBLIN' is a 100% custom designed, high performance, semi auto flywheel blaster, designed to launch half length foam darts using standard talon mags. It is meant as back up blaster (side arm).
The GOBLIN is designed as a very compact blaster that still packs a punch.
Max. kinetic energy is <0.5 Joule.
COLOR COMBINATIONS/ COLOR PICKER
Basically any color combination is possible, click here. To find your combo and send us a screenshot after the purchase. We will then make sure you get the colors that you chose. Please note: The color picker does NOT feature an 'exact'representation of the filament colors. Slight missmatches cannot be ruled out..
Here you will find a description video:
Battery recommendations:
2s lipo: measurements approx. 58x30x15 mm. Both the 'Graphene 2s 950mAh 65c' from Outofdarts and the 'Turnigy Graphene Panther 1000mAh 2s 75c' from Hobbyking fit.
3s lipo: measurements approx. 70x37x17 mm
Materials
The main motor cage is ABS and not PLA. So you do not have to worry about heat that is generated by the motors.
Versions
VERSION (A): Preassembled 2s version
The blaster comes fully assembled with thick silicon wires and an XT60 connector already soldered. You only need to add the lipo and the talon mag.
Main features:
Operation: Semi-automatic
Operating voltage: 7.2V (nominal), 2s LiIon setup
Material: ABS and PLA (and others)
What is in the package?
Fully assembled blaster with Xt60 connector. Plug and play. Talon mag and short darts are not included.
The motors are rated for a 2s setup (max 8.4V). Batteries are not part of this offer (difficulties with shipping etc). The blaster is equipped with a XT60 connectors.
VERSION (B): Preassembled 3s version
The blaster comes fully assembled with thick silicon wires and an XT60 connector already soldered. You only need to add the lipo and the talon mag. The motors are rated for 3s and equipped with ball bearings
.
Fully assembled blaster with Xt60 connector. Plug and play. Talon mag and short darts are not included.
The motors are rated for a 2s setup (max 12.6V). Batteries are not part of this offer (difficulties with shipping etc). The blaster is equipped with a XT60 connectors.
VERSION (C): kit version
This is the kit version; includes all 3D printed parts and screws.
Without motors, wires and switch. Perfect if you want to install your own motors and electronic components.
Caution
DO NOT expose the blaster to heat (e.g. from sun). Temperatures above 45 °C will warp and permanently damage the product which is mainly made from PLA.
Reviews
Legal disclaimer
Do not aim at eyes or face. Do not modify darts or dart blaster. This product is only intended to be used as outlined in the accompanying instruction manual. This item is not a toy, keep away
from children. In no event, regardless of cause, shall my3dbase GmbH be liable for any indirect, special, incidental, punitive or consequential damages of any kind as a result of this product, whether arising under breach of contract, tort (including negligence), strict liability or otherwise, and whether based on this agreement or otherwise, even if advised of the possibility of such damages.
The kinetic energy of the blaster does to exceed 0.5 joule and no hot gases are expelled from the device.
Magazine, darts and battery are not part of this offer.
Rechtliche Hinweise
Achtung! Nicht für Kinder unter 36 Monaten geeignet.
Achtung! Nicht auf Augen oder Gesicht zielen.
Die maximale kinetische Energie liegt bei <0.5Joule.
Um Verletzungen zu vermeiden: Nur Darts oder Pfeile verwenden, die speziell für dieses Produkt entwickelt wurden. Darts, Pfeile und Blaster nicht verändern. Die Schussweiten sind Schätzwerte und basieren auf Testdaten. Die tatsächlichen Ergebnisse des Blasters sind unterschiedlich und hängen vom Zustand der Darts und anderen Faktoren ab.
Altersempfehlung: ab 8 Jahre
Save this product for later
Praktische Accessoires für mehr Ordnung
Für die Skadis® Lochwand
Vollständig kompatibel mit der IKEA® Lochwand Skadis®.